-- *****************************************************************
-- SUPERMICRO-SSM.mib: Super Micro Enterprise Structure of Management Information
--
-- July 2 2013, Software Dept.
--
-- Copyright (c) 1993-2013 by Super Micro Computer Inc.
-- All rights reserved.
-- 
-- *****************************************************************

SUPERMICRO-SSM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Integer32
		FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC
	smSSMInfo
		FROM SUPERMICRO-SMI;
		
smSuperDoctor5MIB MODULE-IDENTITY
	LAST-UPDATED "201307020000Z"
	ORGANIZATION "Super Micro Computer Inc."
	CONTACT-INFO
		"	Software Dept.

		Postal: 980 Rock Avenue
			San Jose, CA  95131
			USA

		   Tel: +1 408 503 8000

		E-mail: SoftLab@supermicro.com"
	DESCRIPTION
		"MIB module for sd5 information"
	::= { smSSMInfo 1 }		

-- sd5
sd5Table OBJECT-TYPE
	SYNTAX	    SEQUENCE OF SD5Entry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of sd5 entries."
	::= { smSuperDoctor5MIB 1 }
	
sd5Entry OBJECT-TYPE
	SYNTAX	    SD5Entry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the sd5 table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { sd5Idx }
	::= { sd5Table 1 }

SD5Entry ::=
	SEQUENCE {
		sd5Idx					Integer32,
		sd5Version				DisplayString,
		sd5MIBVersion			DisplayString
	}

sd5Idx OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The unique value identifies this sd5."
	::= { sd5Entry 1 }
	
sd5Version OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The version of the sd5."
	::= { sd5Entry 2 }
	
sd5MIBVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The MIB version of the sd5."
	::= { sd5Entry 3 }
	
-- cpu	
cpuTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF CpuEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of processor entries."
	::= { smSuperDoctor5MIB 2 }
	
cpuEntry OBJECT-TYPE
	SYNTAX	    CpuEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the processor table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { cpuIndex }
	::= { cpuTable 1 }
	
CpuEntry ::=
	SEQUENCE {
		cpuIndex		DisplayString,
		cpuName			DisplayString,
		cpuDescription		DisplayString,
		cpuManufacturer		DisplayString,
		cpuDeviceStatus		Integer32,
		cpuMaxSpeed		DisplayString,
		cpuCurrentSpeed		DisplayString,
		cpuLoadingPercentage	DisplayString,
		cpuCoreEnabled		Integer32,
		cpuCoreCount		Integer32,
		cpuThreadCount		Integer32,
		cpuSocketDesignation	DisplayString,
		cpuDeviceVersion	DisplayString,
		cpuDeviceID		DisplayString
	}

	
cpuIndex OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The unique value which identifies this processor."
	::= { cpuEntry 1 }
	
cpuName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The name of the processor."
	::= { cpuEntry 2 }
	
cpuDescription OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The description of the processor."
	::= { cpuEntry 3 }
	
cpuManufacturer OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The manufacturer of the processor."
	::= { cpuEntry 4 }
	
cpuDeviceStatus OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status of the processor.
		The status depends on the cpu failure check via BIOS.
		 0: OK
		 2: Critical			"
	::= { cpuEntry 5 }	
	
cpuMaxSpeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The maximum speed (MHz) of the processor."
	::= { cpuEntry 6 }	

cpuCurrentSpeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The current speed (MHz) of the processor."
	::= { cpuEntry 7 }
	
cpuLoadingPercentage OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The loading percentage of the processor."
	::= { cpuEntry 9 }
	
	
cpuCoreEnabled OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The core enabled count of the processor."
	::= { cpuEntry 10 }
	
cpuCoreCount OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The core count of the processor."
	::= { cpuEntry 11 }
	
cpuThreadCount OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The thread count of the processor."
	::= { cpuEntry 12 }
	
	
cpuSocketDesignation OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The socket designation of the processor."
	::= { cpuEntry 14 }
	
cpuDeviceVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The device version of the processor."
	::= { cpuEntry 18 }
	
cpuDeviceID OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The device ID of the processor."
	::= { cpuEntry 20 }


-- memory	
memTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF MemEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of physical memory entries."
	::= { smSuperDoctor5MIB 3 }
	
memEntry OBJECT-TYPE
	SYNTAX	    MemEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the physical memory table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { memTag }
	::= { memTable 1 }

MemEntry ::=
	SEQUENCE {
		memTag						DisplayString,
		memDescription				DisplayString,
		memDeviceStatus				Integer32,
		memLabeledBank				DisplayString,
		memDeviceLocator			DisplayString,
		memModel					DisplayString,
		memManufacturer				DisplayString,
		memPartNumber 				DisplayString,
		memSerialNumber 			DisplayString,
		memCapacity					Integer32,
		memDataWidth				DisplayString,
		memTotalWidth				DisplayString,
		memErrorCount				Integer32,
		memECCErrorCount			Integer32,
		memUECCErrorCount			Integer32
	}

	
memTag OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The tag of the physical memory. The unique value identifies this physical memory."
	::= { memEntry 1 }
	
memDescription OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The description of the physical memory."
	::= { memEntry 2 }

memDeviceStatus OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the physical memory. 
		The status depends on the ECC check result on the physical memory.
		 0: OK
		 2: Critical			"
	::= { memEntry 3 }
	
memLabeledBank OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The labeled bank of the physical memory."
	::= { memEntry 4 }
	
memDeviceLocator OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The device locator of the physical memory."
	::= { memEntry 5 }
	
memModel OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The model name of the physical memory."
	::= { memEntry 7 }	
	
memManufacturer OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The manufacturer's name of the physical memory."
	::= { memEntry 8 }	

memPartNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The part number of the physical memory."
	::= { memEntry 9 }	
	
memSerialNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The serial number of the physical memory."
	::= { memEntry 10 }

memCapacity OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The capacity of the physical memory. (Unit: MB)"
	::= { memEntry 11 }	

memDataWidth OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The data width of the physical memory. (Unit: bit)"
	::= { memEntry 12 }		

memTotalWidth OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The total width of the physical memory. (Unit: bit)"
	::= { memEntry 13 }			
	
memErrorCount OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The error count of the physical memory. 
		It's the summary of the ECC error count and UECC error count."
	::= { memEntry 15 }	
	
memECCErrorCount OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The ECC error count of the physical memory."
	::= { memEntry 16 }	
	
memUECCErrorCount OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The UECC error count of the physical memory."
	::= { memEntry 17 }	
	
-- disk
diskTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF DiskEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of physical disk entries."
	::= { smSuperDoctor5MIB 4 }
	
diskEntry OBJECT-TYPE
	SYNTAX	    DiskEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the physical disk table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { diskName }
	::= { diskTable 1 }

DiskEntry ::=
	SEQUENCE {
		diskSerialNumber			DisplayString,
		diskName					DisplayString,
		diskVendor					DisplayString,
		diskSmartStatus				Integer32,
		diskModel					DisplayString,
		diskSize					Integer32,
		diskMediaType				DisplayString,
		diskInterfaceType			DisplayString,
		diskController				DisplayString
	}	
	
diskSerialNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The serial number of the disk."
	::= { diskEntry 1 }
	
diskName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The name of the disk. The unique value identifies this disk."
	::= { diskEntry 2 }
	
diskVendor OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The vendor name of the disk."
	::= { diskEntry 3 }
	
diskSmartStatus OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the disk. 
		The status depends on the SMART check result on the disk.
		 0: OK
		 2: Critical			"
	::= { diskEntry 4 }


diskModel OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The model of the disk."
	::= { diskEntry 5 }	

diskSize OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The size of the disk. (Unit: MB)"
	::= { diskEntry 6 }
	
	
diskMediaType OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The media type of the disk includes
		 External hard disk media	
		 Removable media other than floppy
		 Fixed hard disk media and Unknown format"
	::= { diskEntry 8 }	
	
diskInterfaceType OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The disk interface types includes IDE, HDC, USB, and SCSI."
	::= { diskEntry 9 }	
	
diskController OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The controller name of the disk."
	::= { diskEntry 10 }

-- system bios
sysBIOSTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF SysBIOSEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of System BIOS entries."
	::= { smSuperDoctor5MIB 5 }
	
sysBIOSEntry OBJECT-TYPE
	SYNTAX	    SysBIOSEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the System BIOS table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { sysBIOSIndex }
	::= { sysBIOSTable 1 }

SysBIOSEntry ::=
	SEQUENCE {
		sysBIOSIndex				Integer32,
		sysBIOSReleaseDate			DisplayString,
		sysBIOSVersion			DisplayString,
		sysBIOSManufacturer			DisplayString
	}	

sysBIOSIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The unique value identifies this BIOS."
	::= { sysBIOSEntry 1 }
	
sysBIOSReleaseDate OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The release date of BIOS."
	::= { sysBIOSEntry 7 }
	
sysBIOSVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The version of BIOS."
	::= { sysBIOSEntry 8 }
	
sysBIOSManufacturer OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The manufacturer's name of BIOS."
	::= { sysBIOSEntry 11 }
	
-- baseboard
mbTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF MBEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of baseboard entries."
	::= { smSuperDoctor5MIB 6 }
	
mbEntry OBJECT-TYPE
	SYNTAX	    MBEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the baseboard table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { mbIndex }
	::= { mbTable 1 }

MBEntry ::=
	SEQUENCE {
		mbIndex				Integer32,
		mbManufacturer			DisplayString,
		mbProductName			DisplayString,
		mbVersionName			DisplayString,
		mbAssetTag			DisplayString,
		mbSerialNumber			DisplayString
	}	

mbIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The unique value identifies this baseboard."
	::= { mbEntry 1 }
	
mbManufacturer OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The manufacturer's name of the baseboard."
	::= { mbEntry 10 }
	
mbProductName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The product name of the baseboard."
	::= { mbEntry 11 }
	
mbVersionName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The version of the baseboard."
	::= { mbEntry 12 }

mbAssetTag OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The asset tag of the baseboard."
	::= { mbEntry 15 }	

mbSerialNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The serial number of the baseboard."
	::= { mbEntry 16 }	

-- operation system
osTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF OSEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of operation system entries."
	::= { smSuperDoctor5MIB 7 }
	
osEntry OBJECT-TYPE
	SYNTAX	    OSEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the operation system table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { osIndex }
	::= { osTable 1 }

OSEntry ::=
	SEQUENCE {
		osIndex			Integer32,
		osName			DisplayString,
		osVersion		DisplayString,
		osManufacturer		DisplayString,
		osSerialNumber		DisplayString,
		osCSDVersion		DisplayString
	}	


osIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The unique value identifies this Operation System."
	::= { osEntry 1 }

osName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The name of the Operation System."
	::= { osEntry 6 }
	
osVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The version of the operation system."
	::= { osEntry 7 }
	
osManufacturer OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The manufacturer's name of the Operation System."
	::= { osEntry 8 }

osSerialNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The serial number of the operation system."
	::= { osEntry 9 }	

osCSDVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { osEntry 10 }	
	
	
-- dmi event logs

dmiLogTable OBJECT IDENTIFIER ::= { smSuperDoctor5MIB 8 }
	
ceccLogTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF CeccLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of operation system entries."
	::= { dmiLogTable 1 }
	
ceccLogEntry OBJECT-TYPE
	SYNTAX	    CeccLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the operation system table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { ceccLogIndex }
	::= { ceccLogTable 1 }

CeccLogEntry ::=
	SEQUENCE {
		ceccLogDatetime		DisplayString,
		ceccLogInfo		DisplayString,
		ceccLogIndex		Integer32
	}
	
ceccLogDatetime OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ceccLogEntry 1 }
	
ceccLogInfo OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ceccLogEntry 2 }
	
ceccLogIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ceccLogEntry 10 }
	

ueccLogTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF UeccLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of operation system entries."
	::= { dmiLogTable 2 }
	
ueccLogEntry OBJECT-TYPE
	SYNTAX	    UeccLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the operation system table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { ceccLogIndex }
	::= { ueccLogTable 1 }

UeccLogEntry ::=
	SEQUENCE {
		ueccLogDatetime		DisplayString,
		ueccLogInfo		DisplayString,
		ueccLogIndex		Integer32
	}
	
ueccLogDatetime OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ueccLogEntry 1 }
	
ueccLogInfo OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ueccLogEntry 2 }
	
ueccLogIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { ueccLogEntry 10 }

postLogTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF PostLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of operation system entries."
	::= { dmiLogTable 8 }
	
postLogEntry OBJECT-TYPE
	SYNTAX	    PostLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the operation system table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { postLogIndex }
	::= { postLogTable 1 }

PostLogEntry ::=
	SEQUENCE {
		postLogDatetime		DisplayString,
		postLogInfo		DisplayString,
		postLogIndex		Integer32
	}
	
postLogDatetime OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { postLogEntry 1 }
	
postLogInfo OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { postLogEntry 2 }
	
postLogIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { postLogEntry 10 }

	
cpuLogTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF CpuLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of operation system entries."
	::= { dmiLogTable 11 }
	
cpuLogEntry OBJECT-TYPE
	SYNTAX	    CpuLogEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the operation system table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { cpuLogIndex }
	::= { cpuLogTable 1 }

CpuLogEntry ::=
	SEQUENCE {
		cpuLogDatetime		DisplayString,
		cpuLogInfo		DisplayString,
		cpuLogIndex		Integer32
	}
	
cpuLogDatetime OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { cpuLogEntry 1 }
	
cpuLogInfo OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { cpuLogEntry 2 }
	
cpuLogIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The CSD version of the operation system."
	::= { cpuLogEntry 10 }

	
-- RAID Controller
raidAdapterTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF RaidAdapterEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of raid controller entries."
	::= { smSuperDoctor5MIB 9 }
	
raidAdapterEntry OBJECT-TYPE
	SYNTAX	    RaidAdapterEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the raid controller table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { raidAdapterIndex }
	::= { raidAdapterTable 1 }

RaidAdapterEntry ::=
	SEQUENCE {
		raidAdapterIndex 		Integer32,
		raidAdapterGroup 		DisplayString,
		raidAdapterId			DisplayString,
		raidAdapterProductName		DisplayString,
		raidAdapterSerialNumber		DisplayString,
		raidAdapterFWPackageBuild	DisplayString,
		raidAdapterFWVersion		DisplayString,
		raidAdapterBIOSVersion		DisplayString,
		raidAdapterVendorId		DisplayString,
		raidAdapterDeviceId		DisplayString,
		raidAdapterSubVendorId		DisplayString,
		raidAdapterSubDeviceId		DisplayString,
		raidIsBBUAbsent 		DisplayString,
		raidIsBBUAbsentIgnored		DisplayString,
		raidAdapterAllinoneStatus	Integer32,
		raidAdapterAllinoneMsg		DisplayString
	}	


raidAdapterIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Raid controller index. The unique value which identifies this raid controller."
	::= { raidAdapterEntry 1 }

raidAdapterGroup OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The group of the raid controller. Values: 
		LSI-MegaRAID
		LSI-Fusion-MPT
		"
	::= { raidAdapterEntry 2 }
	

raidAdapterId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The id of the raid controller. The id is unique in one adapter group."
	::= { raidAdapterEntry 3 }

raidAdapterProductName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The product name of the raid controller."
	::= { raidAdapterEntry 4 }

raidAdapterSerialNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The serial number of the raid controller."
	::= { raidAdapterEntry 5 }

raidAdapterFWPackageBuild OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The build number of the firmware package of the raid controller."
	::= { raidAdapterEntry 6 }

raidAdapterFWVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The firmware version of the raid controller."
	::= { raidAdapterEntry 7 }

raidAdapterBIOSVersion OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The bios version of the raid controller."
	::= { raidAdapterEntry 8 }

raidAdapterVendorId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The PCI vendor id of the raid controller."
	::= { raidAdapterEntry 9 }

raidAdapterDeviceId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The PCI device id of the raid controller."
	::= { raidAdapterEntry 10 }

raidAdapterSubVendorId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The PCI sub-vendor id of the raid controller."
	::= { raidAdapterEntry 11 }

raidAdapterSubDeviceId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The PCI sub-device id of the raid controller."
	::= { raidAdapterEntry 12 }


raidIsBBUAbsent OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Is the BBU absent or present? 
		Values: Absent, Present."
	::= { raidAdapterEntry 13 }

raidIsBBUAbsentIgnored OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Does the raid controller ignore the absent BBU? 
		Values: YES, NO. 
		If the value is No then the absent BBU will affect the all-in-one status of the raid controller."
	::= { raidAdapterEntry 14 }

raidAdapterAllinoneStatus OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the raid controller. Values:
		 0: OK
		 1: Warning
		 2: Critical			
		"
	::= { raidAdapterEntry 15 }


raidAdapterAllinoneMsg OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status message of the raid controller."
	::= { raidAdapterEntry 16 }


-- RAID BBU
raidBBUTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF RaidBBUEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of raid BBU entries."
	::= { smSuperDoctor5MIB 10 }
	
raidBBUEntry OBJECT-TYPE
	SYNTAX	    RaidBBUEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the raid BBU table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { raidBBUIndex }
	::= { raidBBUTable 1 }

RaidBBUEntry ::=
	SEQUENCE {
		raidBBUIndex 			Integer32,
		raidAdapterGroup-BBU	DisplayString,
		raidAdapterId-BBU		DisplayString,
		raidBBUStatus			DisplayString,
		raidBBUAllinoneStatus		Integer32,
		raidBBUAllinoneMsg		DisplayString
	}	


raidBBUIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Raid BBU index. 
		The unique value which identifies this raid BBU."
	::= { raidBBUEntry 1 }

raidAdapterGroup-BBU OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The group of the raid controller. Values: 
		LSI-MegaRAID
		LSI-Fusion-MPT
		"
	::= { raidBBUEntry 2 }
	

raidAdapterId-BBU OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The id of the raid controller. The id is unique in one adapter group."
	::= { raidBBUEntry 3 }


raidBBUStatus OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the properties of the BBU. 
		Values: Passed, Failed."
	::= { raidBBUEntry 8 }


raidBBUAllinoneStatus OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the BBU. Values:
		 0: OK
		 1: Warning
		 2: Critical			
		"
	::= { raidBBUEntry 9}


raidBBUAllinoneMsg OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status message of the BBU."
	::= { raidBBUEntry 10}


-- RAID VD
raidVDTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF RaidVDEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of virtual drive entries."
	::= { smSuperDoctor5MIB 11 }
	
raidVDEntry OBJECT-TYPE
	SYNTAX	    RaidVDEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the virtual drive table. 
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { raidVDIndex }
	::= { raidVDTable 1 }

RaidVDEntry ::=
	SEQUENCE {
		raidVDIndex 			Integer32,
		raidAdapterGroup-VD		DisplayString,
		raidAdapterId-VD		DisplayString,
		raidDiskGroupId			DisplayString,
		raidVDId			DisplayString,
		raidVDTargetId			DisplayString,
		raidVDName			DisplayString,
		raidVDRaidLevel			DisplayString,
		raidVDSize			DisplayString,
		raidVDMirrorDataSize		DisplayString,
		raidVDStripSize			DisplayString,
		raidVDNumDrives			DisplayString,
		raidVDSpanDepth			DisplayString,
		raidVDDefaultCachePolicy	DisplayString,
		raidVDCurrentCachePolicy	DisplayString,
		raidVDDefaultAccessPolicy	DisplayString,                
		raidVDCurrentAccessPolicy	DisplayString,
		raidVDDiskCachePolicy		DisplayString,
		raidVDEncryptionType		DisplayString,
		raidVDDefaultPSPolicy		DisplayString,
		raidVDCurrentPSPolicy		DisplayString,
		raidVDCanSpinUpIn1Min		DisplayString,
		raidVDSupportT10Power		DisplayString,
		raidVDSupportsMaxPS		DisplayString,
		raidVDBadBlocksExist		DisplayString,
		raidVDCached			DisplayString,
		raidVDState			DisplayString,
		raidVDAllinoneStatus		Integer32,
		raidVDAllinoneMsg		DisplayString

	}	


raidVDIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Raid virtual drive index. 
		The unique value which identifies this raid virtual drive."
	::= { raidVDEntry 1 }

raidAdapterGroup-VD	 OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The group of the raid controller. Values: 
		LSI-MegaRAID
		LSI-Fusion-MPT
		"
	::= { raidVDEntry 2 }
	

raidAdapterId-VD OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The id of the raid controller. The id is unique in one adapter group."
	::= { raidVDEntry 3 }


raidDiskGroupId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The disk group id of the virtual drive."
	::= { raidVDEntry 4 }


raidVDId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The id of the virtual drive."
	::= { raidVDEntry 5 }


raidVDTargetId OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The target id of the virtual drive."
	::= { raidVDEntry 6 }


raidVDName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The name of the virtual drive."
	::= { raidVDEntry 7 }


raidVDRaidLevel OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The raid level of the virtual drive."
	::= { raidVDEntry 8 }


raidVDSize OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The size of the virtual drive."
	::= { raidVDEntry 9 }


raidVDMirrorDataSize OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The mirror data size of the virtual drive."
	::= { raidVDEntry 10 }


raidVDStripSize OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The stripe size of the virtual drive."
	::= { raidVDEntry 11 }


raidVDNumDrives OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The number of physical drives of the virtual drive."
	::= { raidVDEntry 12 }


raidVDSpanDepth OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The span depth of the virtual drive."
	::= { raidVDEntry 13 }


raidVDDefaultCachePolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The default cache policy of the virtual drive."
	::= { raidVDEntry 14 }


raidVDCurrentCachePolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The current cache policy of the virtual drive."
	::= { raidVDEntry 15 }


raidVDDefaultAccessPolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The default access policy of the virtual drive."
	::= { raidVDEntry 16 }

raidVDCurrentAccessPolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The current access policy of the virtual drive."
	::= { raidVDEntry 17 }


raidVDDiskCachePolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The disk cache policy of the virtual drive."
	::= { raidVDEntry 18 }


raidVDEncryptionType OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The encryption type of the virtual drive."
	::= { raidVDEntry 19 }


raidVDDefaultPSPolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The default power savings policy of the virtual drive."
	::= { raidVDEntry 20 }


raidVDCurrentPSPolicy OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The default current savings policy of the virtual drive."
	::= { raidVDEntry 21 }


raidVDCanSpinUpIn1Min OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Can the physical drive spin up in 1 minute?"
	::= { raidVDEntry 22 }


raidVDSupportT10Power OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Does the VD have drives that support T10 power conditions?"
	::= { raidVDEntry 23 }


raidVDSupportsMaxPS OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Does the VD's IO profile supports MAX power savings with cached writes?"
	::= { raidVDEntry 24 }

raidVDBadBlocksExist OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Does the virtual drive have bad blocks?"
	::= { raidVDEntry 25 }


raidVDCached OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Is the virtual drive cached?"
	::= { raidVDEntry 26 }


raidVDState OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The state of the virtual drive. Values:
		Offline, Partially-degraded, Degraded, Optimal.
		"
	::= { raidVDEntry 27 }


raidVDAllinoneStatus OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the virtual drive. Values: 
		0: OK
		1: Warning
		2: Critical
		"
	::= { raidVDEntry 28}


raidVDAllinoneMsg OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status message of the virtual drive."
	::= { raidVDEntry 29}

-- RAID PD
raidPDTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF RaidPDEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of physical drive entries."
	::= { smSuperDoctor5MIB 12 }
	
raidPDEntry OBJECT-TYPE
	SYNTAX	    RaidPDEntry 
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the physical drive table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { raidPDIndex }
	::= { raidPDTable 1 }

RaidPDEntry ::=
	SEQUENCE {
		raidPDIndex 			Integer32,
		raidAdapterGroup-PD		DisplayString,
		raidAdapterId-PD		DisplayString,
		raidDiskGroupId-PD		DisplayString,
		raidPDSlotNumber		DisplayString,
		raidPDFirmwareState		DisplayString,
		raidPDMediaErrorCount		DisplayString,
		raidPDOtherErrorCount		DisplayString,
		raidPDPredFailCount		DisplayString,
		raidPDLastPredFailEventSeqNo	DisplayString,
		raidPDRawSize			DisplayString,
		raidPDDeviceFwLevel		DisplayString,
		raidPDInquiryData		DisplayString,
		raidPDDeviceSpeed		DisplayString,
		raidPDLinkSpeed			DisplayString,
		raidPDMediaType			DisplayString,
		raidPDWriteCache		DisplayString,
		raidPDNCQSetting		DisplayString,
		raidPDPort0Linkspeed		DisplayString,
		raidPDPort0Status		DisplayString,
		raidPDPort1Linkspeed		DisplayString,
		raidPDPort1Status		DisplayString,
		raidPDEnclosureDeviceID		DisplayString,
		raidPDOpProgress		DisplayString,
		raidPDSpan			DisplayString,
		raidPDAllinoneStatus		Integer32,
		raidPDAllinoneMsg		DisplayString

	}	


raidPDIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Raid physical drive index. 
		The unique value which identifies this raid physical drive."
	::= { raidPDEntry 1 }

raidAdapterGroup-PD	OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The group of the raid controller. Values: 
		LSI-MegaRAID
		LSI-Fusion-MPT
		"
	::= { raidPDEntry 2 }
	

raidAdapterId-PD OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The id of the raid controller. The id is unique in one adapter group."
	::= { raidPDEntry 3 }


raidDiskGroupId-PD OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The disk group id of the virtual drive."
	::= { raidPDEntry 4 }

raidPDSlotNumber OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The slot number of the physical drive."
	::= { raidPDEntry 5 }


raidPDFirmwareState OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The firmware state of the physical drive. Values: 
		unconfigured-good, unconfigured-bad, hot-spare, offline, failed, rebuild, online, and copyback"
	::= { raidPDEntry 6 }


raidPDMediaErrorCount OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The media error count of the physical drive."
	::= { raidPDEntry 7 }


raidPDOtherErrorCount OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The other error count of the physical drive."
	::= { raidPDEntry 8 }


raidPDPredFailCount OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The predictive failure count of the physical drive."
	::= { raidPDEntry 9 }

raidPDLastPredFailEventSeqNo OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The last predictive failure event sequence number of the physical drive."
	::= { raidPDEntry 10 }

raidPDRawSize OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The raw size of the physical drive."
	::= { raidPDEntry 11 }

raidPDDeviceFwLevel OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The device firmware level of the physical drive."
	::= { raidPDEntry 12 }

raidPDInquiryData OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The inquiry data of the physical drive."
	::= { raidPDEntry 13 }

raidPDDeviceSpeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The device speed of the physical drive."
	::= { raidPDEntry 14 }

raidPDLinkSpeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The link speed of the physical drive."
	::= { raidPDEntry 15 }

raidPDMediaType OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The media type of the physical drive."
	::= { raidPDEntry 16 }

raidPDWriteCache OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The write cache of the physical drive."
	::= { raidPDEntry 17 }

raidPDNCQSetting OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The NCQ setting of the physical drive."
	::= { raidPDEntry 18 }

raidPDPort0Linkspeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The link speed of port 0 of the physical drive."
	::= { raidPDEntry 19 }

raidPDPort0Status OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status of port 0 of the physical drive."
	::= { raidPDEntry 20 }

raidPDPort1Linkspeed OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The link speed of port 1 of the physical drive."
	::= { raidPDEntry 21 }

raidPDPort1Status OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status of port 1 of the physical drive."
	::= { raidPDEntry 22 }

raidPDEnclosureDeviceID OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The enclosure id of the physical drive."
	::= { raidPDEntry 23 }

raidPDOpProgress OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The operation progress of the physical drive."
	::= { raidPDEntry 24 }

raidPDSpan OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The span of the physical drive."
	::= { raidPDEntry 25 }

raidPDAllinoneStatus OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the status of the physical drive. Values: 
		0: OK
		1: Warning
		2: Critical
		"
	::= { raidPDEntry 26}


raidPDAllinoneMsg OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The status message of the physical drive."
	::= { raidPDEntry 27}


smSSMTrapMIB  		OBJECT IDENTIFIER ::= { smSSMInfo 3 }

trapFanNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Fan Speed has returned to Normal"

	--#TYPE       "FAN Event"
	--#SUMMARY    "Fan Speed has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 101

trapFanWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Fan Speed is Warning"

	--#TYPE       "FAN Event"
	--#SUMMARY    "Fan Speed is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 102
	
trapFanCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Fan Speed is Critical"

	--#TYPE       "FAN Event"
	--#SUMMARY    "Fan Speed is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 103
	
trapVoltageNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Voltage has returned to Normal"

	--#TYPE       "Voltage Event"
	--#SUMMARY    "Voltage has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 201

trapVoltageWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Voltage is Warning"

	--#TYPE       "Voltage Event"
	--#SUMMARY    "Voltage is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 202
	
trapVoltageCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Voltage is Critical"

	--#TYPE       "Voltage Event"
	--#SUMMARY    "Voltage is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 203

trapTemperatureNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Temperature has returned to Normal"

	--#TYPE       "Temperature Event"
	--#SUMMARY    "Temperature has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 301

trapTemperatureWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Temperature is Warning"

	--#TYPE       "Temperature Event"
	--#SUMMARY    "Temperature is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 302
	
trapTemperatureCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Temperature is Critical"

	--#TYPE       "Temperature Event"
	--#SUMMARY    "Temperature is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 303
	
trapChassisIntrusionCleared TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Chassis Intrusion has cleared"

	--#TYPE       "Chassis Intrusion Event"
	--#SUMMARY    "Chassis Intrusion has cleared"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 401
	
trapChassisIntrusion TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Chassis Intrusion has triggered"

	--#TYPE       "Chassis Intrusion Event"
	--#SUMMARY    "Chassis Intrusion has triggered"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 403

trapStorageSMARTCheckNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage SMART Check has returned to Normal"

	--#TYPE       "Storage SMART Check Event"
	--#SUMMARY    "Storage SMART Check has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 601

trapStorageSMARTCheckWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage SMART Check is Warning"

	--#TYPE       "Storage SMART Check Event"
	--#SUMMARY    "Storage SMART Check is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 602
	
trapStorageSMARTCheckCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage SMART Check is Critical"

	--#TYPE       "Storage SMART Check Event"
	--#SUMMARY    "Storage SMART Check is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 603

trapPowerSupplyNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Power Supply has returned to Normal"

	--#TYPE       "Power Supply Event"
	--#SUMMARY    "Power Supply has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 701

trapPowerSupplyWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Power Supply is Warning"

	--#TYPE       "Power Supply Event"
	--#SUMMARY    "Power Supply is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 702
	
trapPowerSupplyCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Power Supply is Critical"

	--#TYPE       "Power Supply Event"
	--#SUMMARY    "Power Supply is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 703

trapMemoryCeccNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory CECC has returned to Normal"

	--#TYPE       "Memory CECC Event"
	--#SUMMARY    "Memory CECC has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 801

trapMemoryCeccWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory CECC is Warning"

	--#TYPE       "Memory CECC Event"
	--#SUMMARY    "Memory CECC is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 802
	
trapMemoryCeccCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory CECC is Critical"

	--#TYPE       "Memory CECC Event"
	--#SUMMARY    "Memory CECC is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 803
	
trapMemoryUeccNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory UECC has returned to Normal"

	--#TYPE       "Memory UECC Event"
	--#SUMMARY    "Memory UECC has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 901

trapMemoryUeccWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory UECC is Warning"

	--#TYPE       "Memory UECC Event"
	--#SUMMARY    "Memory UECC is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 902
	
trapMemoryUeccCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Memory UECC Critical"

	--#TYPE       "Memory UECC Event"
	--#SUMMARY    "Memory UECC is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 903


trapGenericNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Monitored item has returned to Normal"

	--#TYPE       "Generic Event"
	--#SUMMARY    "Monitored item has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 1001

trapGenericWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Monitored item is Warning"

	--#TYPE       "Generic Event"
	--#SUMMARY    "Monitored item is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 1002
	
trapGenericCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Monitored item Critical"

	--#TYPE       "Generic Event"
	--#SUMMARY    "Monitored item is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 1003


trapBbpStatusNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "BBP has returned to Normal"

	--#TYPE       "BBP Event"
	--#SUMMARY    "BBP has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 1101

trapBbpStatusWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "BBP is Warning"

	--#TYPE       "BBP Event"
	--#SUMMARY    "BBP is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 1102
	
trapBbpStatusCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "BBP is Critical"

	--#TYPE       "BBP Event"
	--#SUMMARY    "BBP is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 1103

trapCpuFaultNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Processor Fault has returned to Normal"

	--#TYPE       "Processor Fault Event"
	--#SUMMARY    "Processor Fault has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 1201

trapCpuFaultWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Processor Fault is Warning"

	--#TYPE       "Processor Fault Event"
	--#SUMMARY    "Processor Fault is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 1202
	
trapCpuFaultCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Processor Fault is Critical"

	--#TYPE       "Processor Fault Event"
	--#SUMMARY    "Processor Fault is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 1203

trapStorageAdapterStatusNormal TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage Adapter has returned to Normal"

	--#TYPE       "Storage Adapter Event"
	--#SUMMARY    "Storage Adapter has returned to Normal"
	--#ARGUMENTS  {}
	--#SEVERITY   INFORMATIONAL

	::= 1301

trapStorageAdapterStatusWarning TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage Adapter is Warning"

	--#TYPE       "Storage Adapter Event"
	--#SUMMARY    "Storage Adapter is Warning"
	--#ARGUMENTS  {}
	--#SEVERITY   WARNING

	::= 1302
	
trapStorageAdapterStatusCritical TRAP-TYPE
	ENTERPRISE smSSMTrapMIB
	DESCRIPTION "Storage Adapter is Critical"

	--#TYPE       "Storage Adapter Event"
	--#SUMMARY    "Storage Adapter is Critical"
	--#ARGUMENTS  {}
	--#SEVERITY   CRITICAL

	::= 1303

END